Fertan Destroys Rust

DESTROYING RUST - PROTECTING STEEL
10 year rust guarantee

FEATURES & BENEFITS

• SIMPLE TO USE – Just paint, spray or sponge directly onto the rust
• ELIMINATES SANDING, BRUSHING AND ACID DIPPING – no mess and no need to get all the tools out
• PATENTED FORMULA – only targets rust and will not damage surrounding, metal, trim, paint or plastic/rubber
• GERMANY’S BESTSELLING RUST TREATMENT –10 year guarantee on treated surfaces

FROM A RUSTY ROVER TO A CORRODING CORTINA, AND A FLAKEY FLANGE TO A ROTTING RIVET YOU CAN RELY ON FERTAN – GUARANTEED. WITHIN 12 HOURS OF TREATMENT THE AREA IS FREE OF RUST, NOT JUST THE SURFACE BUT THE UNDERLYING METAL TOO. IT’S AS GOOD AS BRIGHT STEEL WITH NO CORROSION TO SA3 STANDARD.

Info & Instructions

Fertan is a complex patented product which completely destroys rust, replacing it with a bonded layer of iron tannate and zinc phosphate, a perfect base for painting. This surface is completely neutral and non-acidic. Fertan simply converts rust into an inert dust and detaches it from the metal. Having uncovered the metal it then bonds to the clean surface which protects it from further rust attacks.

Unlike many inferior products, Fertan does not simply coat or seal in the existing corrosion. Fertan’s double action dissolves the rust and then bonds with the metal to form a resilient layer of ferro-tannic non-soluble compounds.

Fertan can be applied to both slightly rusty metal and hard rust. Following treatment, rust that has been converted by Fertan can simply be brushed or rinsed off. When applied to bare metal Fertan produces a finish equivalent to the highest industry standard of SA3, normally only achieved using acid bath treatment.

Fertan is a thin liquid that penetrates well into joints and hard to reach areas, as well as paint cracks. Unlike like other rust treatments Fertan is harmless to plastic, rubber, chrome and other painted surfaces. It is only active in contact with iron, steel or rust and can be washed off any other surface using just water. It is non flammable and is safe and easy to use.

Fertan can be used to treat heavily corroded surfaces including box sections, sills, body panels etc. it can also be used on sanded or cleaned metal to protect the surface prior to painting. Fertan is only suitable for use with ferrous based metals.

Instructions

• Remove loose rust and scale if possible.
• Apply Fertan with a brush, roller, sponge or spray gun.
• The Fertan process begins immediately and takes approximately 24 hours to complete (quicker in warm conditions).
• Wipe off surplus and loose dust with a wet cloth.
• Fertan can then be painted or coated immediately but surfaces can be left for weeks or months unpainted if required.
• 1 litre treats 12 – 15 m2 of metal.

Fertan Destroys Rust

DESTROYING RUST - PROTECTING STEEL
10 year rust guarantee

Note the vehicle is striped down for illustration purposes only

DE SCALE AREAS TO BE TREATED

APPLY FERTAN AND WORK INTO THE RUSTY AREAS.

LEAVE FOR 24 HRS TO ALLOW REACTION

AFTER 24 HRS OBSERVE THE COLOUR CHANGE, NOW WASH OR BRUSH OFF RESIDUE. AND CONTINUE WITH YOU REPAIR.